![]() After the download is complete, the upgrade starts and "VUP" appears on the player front panel display.Note:The "*" changes to "0" through "9," indicating the download progress. During the download the message "DL */9" is displayed on the television and on the player front display. ![]() The download process starts and the download screen is displayed on the television.Select "OK" and then press the ENTER button.The message "Perform version update?" is displayed on the television.At the xross media barâ„¢ menu, use the arrow keys on the remote control to select "Setup" - "Network Update" and then press the ENTER button.If there is a disc in the player, please remove the disc.Connect the "LAN(100)" terminal on the player to your Internet source using an Ethernet cable.Power on the television and make sure it is tuned to the inputs to which the Blu-ray Disc player is connected.Note: The firmware upgrade process usually takes about 15 to 30 minutes, depending on system configuration and network connection. Failure to follow the instructions may interrupt the upgrade process and may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING!! Please follow the upgrade instructions carefully. It is highly recommended that you print out these instructions for use as a reference during the installation process.In order to perform the firmware upgrade, it is necessary to have the player correctly connected to a compatible television.Note:If you cannot connect the player to your Internet source, please see the How To Get the Firmware Upgradesection above for information about firmware upgrade disc options. In order to use this upgrade method it is necessary to have the player correctly connected to an active Internet connection.Loss of power during the installation of the firmware upgrade may cause the Blu-ray Disc player to be unresponsive or to require repair. WARNING!! Do not power off the Blu-ray Disc player or disconnect it from the AC power outlet. ![]() WARNING!! Please follow the upgrade instructions carefully.If you have not done so already, please check the current firmware versionto determine if this firmware upgrade is needed for your Blu-ray Disc player.The Network Upgrade operation is straightforward, so it is highly recommended that you use the Network Upgrade method to upgrade the Blu-ray Disc player firmware. If you have questions or require assistance, please contactSony Support at 1-866-909-SONY (7669). After you receive the disc, please see the Disc Upgrade Instructionssection below, for more information.If you are unable to create the upgrade disc you can purchase one from the True Manuals web site. ![]() ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |